Shop

DESCRIPTION: The PorcelainPlus Speedbit(R) was specifically designed for drilling efficiently through hard surfaces. Its speed and durability distinguish itself from other standard carbide bits. With a specially formulated mix of metals and superior designed carbide tip, the PorcelainPlus Speedbit(R) makes installations quicker and easier, therefore, more profitable. FEATURES: • Specially formulated carbide tip for greater durability and clean precise holes. • No walking and easy start-up. No tape, center punching or pilot holes are required. • Can drill near edges of tiles/glass without cracking substrate. • Average of 25 seconds per hole (based on PEI Class V porcelain tile with ¼” Speedbit). • Drills 15+ holes per bit (based on PEI Class V porcelain tile with ¼” Speedbit).   Internal test results show the Porcelainplus Speedbit Drilled more than three (3) times as many holes and more than twice as fast as most competitive bits (Refer to Comparison Chart). INSTRUCTIONS:

• Use a hand held cordless drill.
• Dip the drill bit tip in a cup of cool water before starting.
• Place the drill bit on the specified mark, apply pressure, listen for a slight CRUNCH and start your drilling process.
• USE MODERATE PRESSURE WHEN DRILLING.
• BECAUSE THE SPEEDBIT IS A SCRAPING TOOL, IT WILL GENERATE HIGH HEAT (YOU WILL RECOGNIZE THIS WHEN THE DRILL BIT STARTS TO RELEASE SMOKE). WHEN THIS STARTS HAPPENING, STOP DRILLING AND RE-DIP THE TIP INTO WATER (TYPICALLY EVERY 5-8 SECONDS, MORE WHEN DRILLING HARDER SURFACES). THIS WILL COOL THE BIT DOWN AND MAXIMIZE ITS LONGEVITY.
• Continue this sequence until the hole is completely drilled. For best results your drilling speed should be 2,300 RPM's and slowed down while breaking through the hole.
• Do not apply excessive pressure. Do not use dull or damaged bit. Do not use in hammer drills.
• Wear ANSI-approved safety goggles and heavy-duty work gloves during use and when handling bit.

See for yourself how it compares to other carbide tip bits in the market.

* Orders typically ship within 24-48 hours

Pricing Chart:

 

Other sizes and lengths available upon request*

For quantities over 100 bits, please contact us for discounted pricing. Free Shipping on Orders of 100 bits or more to (Continental US) ORDERS TYPICALLY SHIP WITHIN 24-48 HOURS For shipments outside of the US, please contact us directly. Dealer Inquiries Welcome- Please contact us.