Product Overview
The PorcelainPlus Cyclone® is a tungsten carbide-tipped, multi-purpose masonry/tile drill bit that was specifically designed for drilling quickly and efficiently through porcelain, masonry, and other hard surfaces for a variety of applications. Its speed and durability distinguish itself from other standard carbide masonry bits. With a specially formulated mix of metals and superior designed carbide tip, the PorcelainPlus Cyclone® makes installations quicker and easier, therefore, more profitable.
Features
- Tungsten Carbide-Tipped, Multi-Purpose Masonry/Tile Drill Bit
- 3X Longer Life & 2X Faster than standard masonry/tile bits
- Drills 10+ holes/bit*
- Faster Drilling Times (average 30 sec/hole)
- Specifically designed for porcelain, masonry, and harder substrates
- Quick & easy start up
- Clean holes
- Hammer or Handheld Drill - Recommended drilling speed of 600 rpms
*Based on PEI Class 5 porcelain tile with a ¼” PorcelainPlus Cyclone®
Product Info
| DIAMETER | 3/16″ | 1/4″ |
| OVERALL LENGTH | 3 1/2″ | 4″ |
| CODE | PPCYC316 | PPCYC14 |
Instructions (for maximum durability):
- 1. DIP IN WATER before drilling and about every 5 seconds during drilling (more often when going through harder materials). We find dipping in water is more effective at cooling the PorcelainPlus bits than spraying.
- 2. FIRM PRESSURE: Let the bit do the work - Do not apply excessive pressure. Place the drill bit on the specified mark, apply pressure, listen for a slight CRUNCH, and start your drilling process.
- 3. USE PROPER DRILLING SPEED: Cyclone: 600 rpms and slowed down while breaking through the hole.
- The Cyclone can be used in a Handheld or Hammer Drill.
- Do not use dull or damaged bit.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during use and when handling bit.
