Porcelain Cyclone
Product Info
DIAMETER | 3/16″ | 3/16″ | 1/4″ | 1/4″ |
OVERALL LENGTH | 4″ | 6″ | 4″ | 6″ |
CODE | PCYC316 | PCYC316-6 | PCYC14 | PCYC14-6 |
Porcelain Cyclone® BOGO Offer
Introductory Buy One Get One Free & FREE Shipping on all Cyclone Orders:
Because we know it can take time to get used to a new product, we are giving new customers BOGO Free on all Cyclone orders until October 31, 2021. We want installers to familiarize themselves with the proper speed & pressure to maximize the Porcelain Cyclone’s performance. Use Promo Code BOGOCYCLONE at checkout. It is as simple as that!
*Terms of Program:
• You must use Promo Code BOGOCYCLONE at time of order.
• No Minimums.
• Scodd Industries reserves the right to limit the maximum amount of free drill bits per customer.
• Free drill bit sizes to match bit sizes from order.
• Pricing is based on website retail pricing.
• Free Shipping to Continental US.
• BOGO offer not valid on Porcelain Speedbits or Trial Packs
• Cannot be combined with any other offer or special.
Product Overview
The Porcelain Cyclone is a tungsten carbide-tipped, multi-purpose masonry/tile drill bit that was specifically designed for drilling quickly and efficiently through porcelain, masonry, and other hard surfaces for a variety of applications. Its speed and durability distinguish itself from other standard carbide masonry bits. With a specially formulated mix of metals and superior designed carbide tip, the Porcelain Cyclone makes installations quicker and easier, therefore, more profitable.
Features
- Tungsten Carbide-Tipped, Multi-Purpose Masonry/Tile Drill Bit
- 3X Longer Life & 2X Faster than standard masonry/tile bits
- Drills 10+ holes/bit*
- Faster Drilling Times (average 30 sec/hole)
- Specifically designed for porcelain, masonry, and harder substrates
- Quick & easy start up
- Clean holes
- Hammer or Handheld Drill - Recommended drilling speed of 600 rpms
*Based on PEI Class 5 porcelain tile with a ¼” Porcelain Cyclone
Recommended for Use On
- Porcelain Tile
- Glass Tile
- Granite
- Brick
- Crystallized Glass
- Quartz
- Marble
- Concrete Block
- Ceramic Tile
- Glass*
- Mirrors*
*Porcelain Speedbit Recommended
Applications
- Frameless Shower Doors
- Bathroom Partitions
- Tile
- Bathroom Accessories
- Masonry
- Decorative Glass*
- Glass*
- Mirrors*
*Porcelain Speedbit Recommended
Instructions (for maximum durability):
- 1. DIP IN WATER before drilling and about every 5 seconds during drilling (more often when going through harder materials). We find dipping in water is more effective at cooling the Porcelain bits than spraying.
- 2. FIRM PRESSURE: Let the bit do the work - Do not apply excessive pressure. Place the drill bit on the specified mark, apply pressure, listen for a slight CRUNCH, and start your drilling process.
- 3. USE PROPER DRILLING SPEED: Cyclone: 600 rpms and slowed down while breaking through the hole.
- The Cyclone can be used in a Handheld or Hammer Drill.
- Do not use dull or damaged bit.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during use and when handling bit.